Install Error
3 posters
Page 1 of 1
Install Error
I'm getting this error on install. My c: drive is a small SSD and I have my temp dir residing on D: , is that the problem?
sgrinavi- Posts : 3
Join date : 2011-06-02
Re: Install Error
Yup, that's most likely the problem. Which version are you trying to install, 2011 for XP or Vista/Win 7?
I can send manual install instructions.
I can send manual install instructions.
Re: Install Error
Hi Joe,
Thanks for your reply.
I am using Win 7 / 64
Thanks for your reply.
I am using Win 7 / 64
sgrinavi- Posts : 3
Join date : 2011-06-02
Manual Install
Download this .zip file and extract it.
http://www.revitusergroup.com/Addins/2011/Manual_Install_2011_Win7.zip
Copy the contents of the Program Files folder to the Program Files folder on you PC and copy the contents of the 2011 folder to: C:\Program Data\Autodesk\Revit\Addins\2011
The next time you start Revit you should see the tools under the Addins tab of the Revit ribbon.
http://www.revitusergroup.com/Addins/2011/Manual_Install_2011_Win7.zip
Copy the contents of the Program Files folder to the Program Files folder on you PC and copy the contents of the 2011 folder to: C:\Program Data\Autodesk\Revit\Addins\2011
The next time you start Revit you should see the tools under the Addins tab of the Revit ribbon.
Re: Install Error
Thanks! I really appreciate you going out of your way to take care of my issue.
I will let you know how it turns out.
I will let you know how it turns out.
sgrinavi- Posts : 3
Join date : 2011-06-02
VendorId problem.
Hello I am trying to install your toolbar into Revit 2012 Architecture and am getting the error "Failed to initialize the add-in "CRUGTools.addin" because the add-in registrationj is missing the required value of VendorId node. The VendorId node identify the vendor of the add-in application. For Revit to run the add-in, you must register the node defined in manifest "CRUGTools.addin" file."
Is this information available so I can tryout this great looking addin?
Is this information available so I can tryout this great looking addin?
jmqrsq- Posts : 9
Join date : 2011-08-11
Re: Install Error
The link and instructions above will only work for Revit 2011. To install the addin for 2012 download the setup file from here.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|